BitEdit Trucks / Industrial Delphi ETC3

Trucks/Industrial Delphi ETC3 ECU Module

Supported Vehicles: DAF, Kenworth, Peterbilt, Tatra (Hyundai not supported)

• Air Calculation: Desired, expected, max, and min air mass flow.
• Boost Pressure: Air pressure, boost limitation, loss adjustment, sensor, correction factors.
• DPF: Cold engine factor, max fuel value, DPF fault fuel limit, regeneration speed reference.
• EGR Control: Ambient pressure correction, max/min EGR position, open loop control.
• Exhaust Temperature: Upper/lower limits, max/min exhaust temperature.
• Fan Control (test): Fuel limitation, smoke fuel limit, fuel for ignition mode.
• Injection: Injection rate, timing efficiency loss.
• Lambda: High/low threshold, reference at cold/hot temps, limiter factors.
• Limiters (test): Engine speed, vehicle speed.
• NOx: NO2 NOx ratio, virtual NOx calculation, cold/hot reference.
• Rail Pressure: Base and max rail pressure demand compensation.
• SCR (ADBlue): Temperature limits, inlet temperature to disable SCR, O2 reference for cold.
• Torque: Primary retarder, electric/mechanical fan torque, max achievable torque.
• Volumetric Efficiency: Efficiency reference.
• DTC: Supported.

discover all BitEdit products from here