BitBox VAG Continental Simos [SM2 ONLY]

Module for working with Continental Simos 12,18, and PCR2.1 ECUs used in VAG vehicles.

VAG Continental Simos 12.X (FID: 401, 406)
Supports Simos 12.1 and 12.2 ECU types.
ECU based on TC1797 with internal flash memory of 4Mb.
Allows reading of FullFlash and writing of calibration area on the BENCH with checksum correction by CANbus. No open ECU required.
Requires SM2/SM2 Pro J2534 and special BENCH adapter cable with GPT support.

VAG Continental Simos 16.11 (FID: 410)
ECU based on TC1791 with internal flash memory of 4Mb.
Allows reading of FullFlash and writing of calibration area in BSL mode with checksum correction. Opening ECU and soldering is required.
Works only with SM2/SM2 Pro J2534 and special BENCH adapter cable with GPT support.

VAG Continental Simos 18.X (FID: 402)
Supports Simos 18.1, 18.2, 18.6 ECU types. Simos 18.3 is in TEST mode.
ECU based on TC1791 with internal flash memory of 4Mb.
Allows reading of FullFlash and writing of calibration area in BSL mode with checksum correction. Opening ECU and soldering is required.
Works only with SM2/SM2 Pro J2534 and special BENCH adapter cable with GPT support.

VAG Continental Simos 18.10 (FID: 403)
ECU based on TC1791 with internal flash memory of 4Mb.
Allows reading of FullFlash and writing of calibration area in BSL mode with checksum correction. Opening ECU and soldering is required.
Works only with SM2/SM2 Pro J2534 and special BENCH adapter cable with GPT support.

VAG Continental Simos PCR2.1 (FID: 411)
ECU based on TC1796 with internal flash memory of 2Mb.
Allows reading of FullFlash and writing of calibration area in BENCH mode with checksum correction. Opening ECU and soldering is NOT required.
Works only with SM2/SM2 Pro J2534 and special BENCH adapter cable with GPT support.

discover all BitBox products from here