HYDRAULIC VEHICLE POSITIONING JACK Steel 700kg 

HYDRAULIC VEHICLE POSITIO NING JACK  , 33 cm steel ROLLER

Max, Capacity: 1500lbs

1. Close release valve by turning handwheel clockwise to a snug -tight position. To lift tire, operate the Jack by foot.

2. To unload, open release valve by turning handwheel cou nterclockwise slowly.

3. DO NOT operate Jack on inclined surfaces. Jack must be used on level surfaces only.

4. DO NOT overload Jack's beyond the load rating (1500lbs per unit).

CAUTION

5. DO NOT start the vehicle's engine, or drive with Jack in use. Jacks are designed for hand manoevering of vehicles only.

6. Before operating, open release valve by turning handwheel co-Unterclockwise. Expand Jack by bandwheel enough to place around tire and position so both rollers now contact the tire tread. Close release valve by turning hand, Jack may now be used.

7. After lifting, be sure always lock the pin in place before using. Pull the pin out after finishing work and then release the valve.

discover all jacks product from here