CombiLoader SIMOS12/16/18 VAG (J2534)

CombiLoader v.3 is a software and hardware system for reading and writing FLASH and EEPROM in the ECUs installed in various vehicles. It provides writing of the map area without dismantling an ECU from the vehicle by means of the diagnostic writing method for all the ECUs when possible. The flasher is convenient to work with, reliable and has a number of additional functions. It is regularly updated and provided with technical support.

CombiLoader SIMOS12/16/18 VAG (J2534)

The modules are designed to read-write SIMOS12.1/12.2/16.11/18.1/18.2/18.6/18.10 ECUs installed on VAG vehicles.

Work with SIMOS12.1/12.2 ECU is performed on the table without opening the ECU. Virtual reading and writing of software/calibrations through the diagnostic connector is supported.
Work with SIMOS16.11 ECU is performed on the table with opening the ECU. Virtual reading and writing of software/calibrations through the diagnostic connector is supported.
Work with SIMOS18.1/18.2/18.6/18.10 ECU is performed on the table with ECU opening. Virtual reading and writing of software/calibrations via the diagnostic connector is supported (except SIMOS18.10).

Identification and error reading/resetting functions are also available.

The module requires connection to the ECU using a J2534 Dialink or SM2/SM2Pro adapter. Please refer to the documentation for details.

The module performs automatic recalculation of the CW of the recorded calibrations.
The module allows full reading and writing of the ECU contents except for the OTP area.

CombiLoader SIMOS12/16/18 VAG (J2534)

For All CombiLoader Software press here