1. Support DOIP, work on latest Mercedes to year 2021 (Does not support DAS)
2. Support DTS Engineering
3. with 256GB SSD Software in package with free activation (If you already have eCOM software, you can choose hardware only)
4. Support XENTRY

Note: eCOM Hardware can ONLY works with eCOM Software from VXDAS, other software may have incompatibility problem.

eCOM Latest Firmware Don't support Vediamo.

If you need hardware only, please confirm with VXDAS online customer service first.

Functions:

1. Perfect DoIP/CAN communication.
2. Quick Test: Quick test of the whole vehicle ECU, you can choose to edit more functions at the same time.
3. Variant Coding: With variant code to add VO-delete VO function.
4. Identification: One-click to read all module programming numbers of the entire car and save.
5. Complete Variant Coding: Read all ECUcoding data of the vehicle at one time, can be written to the vehicle again, completely offline operation.
6. Diagnostic Services: Advanced Features view internal and external data for the module you selected, turn on computer authorization (not driving authorization), activate the ECU, reset the ECU, and modify the original chassis number.
7. Flashprogramming: Achieve complete offline programming.
8. Diagnostic Trouble Code: Diagnostic module DTC .
9. ECU Exchange: Two identical ECUs exchange .
10. Automatic performance: Automatically activate dts Monaco 8.14 software when connected to the device.

Benz ECOM Doip Information:

Perfect support programming coding
Retrofit folding mirror
Airbag unlock
Turn off the start and stop function
Opencorner auxiliary light
Keyless entry modification
Turn off the engine fault light
Turn off the seat belt sound reminder
Change the ESP computer chassis number
Daytime running lights lit at night
Add original atmosphere lamp
Low with headlights upgraded with high headlights
Add folding mirrors
Add seat memory
Add reversing image
Change the host boot screen
Open sound and light synchronization
Turn off the seat belt sound reminder
Cancel driving to watch DVD
Change the blinking frequency of the turn signal
Cancel the urea system
Urea Alarm Solution*************
Original high quality power chip Correct identification voltage

Benz eCOM DoiP Multiplexer Features:

Supports DoIP protocol 

ECOM Box Hardware Serial number starts with 2xxxxx

Works with Xentry and Engineering programs DTS Monaco

Actia eCOM DoIP Box Multiplexer Kit Support DoIP for latest E and S series, MB eCOM DoIP diagnostic C5 Xentry Perfect for Perfect for Mercedes COMAND NTG5, NTG5s1, NTG5s2, NTG5.5

Mercedes ECOM is the diagnostic and swipe communication interface used by daimler-benz's production and r&d department. It supports the after sales diagnostic software Xentry and the Monaco DTS, the exclusive development software, with higher access rights than SDconnect (C4).

Xentry commonly known as: exploit data engineering version after 2010, has added many restrictions on functions. Therefore, people may encounter that the vehicle version is too new to enter the control unit, or they cannot make any special modifications after entering the control unit. For example, the w204/212 2012 meter may need to be configured in the regional language, or turn on other convenience functions.

The database of diagnosis /coding/retrofit/flashing for the Mercedes engineer version USES the Xentry database, so the Mercedes engineer version is dependent on the Xentry version. As long as the database is new, the Mercedes engineer version can use the V4.00 version on the new model, and compact3 & SDconnect does not support the ODX document. The latest V5.00 supports ODX files with eCom. It is recommended to use eCom with DoIP function, which is faster and more stable.

Benz ECOM Doip Manual:

1. ECom supports the CAN/DoIP network, which can be used for the diagnosis and brushing of new car audio and video entertainment systems.
2. The Xentry and DAS currently in use are developed based on Vediamo and delivered to general after-sales dealers.
3. Therefore, it's possible to use Mercedes super engineering software Vediamo for diagnosis, coding, programming ,retrofitting.
4. It is possible to add or reduce SA codes freely without going through VEDOC (the process of the original factory applying for modifying the equipment code),so as to achieve the purpose of modifying the vehicle equipment, such as adding SA500 electric rearview mirror.

Benz Ecom DoIP Car Applications:

Newest vehicles Only (after 2009 - w204 and up) Serial 200xxx

Special for DoIP programming on the latest E and S series.

Perfect for Mercedes COMAND NTG5, NTG5s1, NTG5s2, NTG5.5 flashing/programming

Actia I+ME eCOM DoiP Technical Data:

ECOM DoIP PC Interface: Ethernet / USB (with special cable)

Microprocessor: 32Bit MPC5200 @396MHz

Memory: 64MB RAM, 40 MB Flash

Voltage supply: 12/24 VDC

Operating Temperature: 0..45°C

Storage temperature: -20°C..70°C

Vehicle interface: galvanically decoupled

CAN1 (high speed)

CAN2 (high/low speed)

K-Line

LIN

Ethernet DoIP

KL15

Mercedes Ecom Xentry Software Description

Xentry Software Includes:

• Xentry: 2022.06
• DAS:    2022.06 (Does not support DAS)
• EPC:    2018.11
• WIS:     2020.10
• SDmedia: 2015.01
• Star Finder : 2016, add StarFinder 2020
• PL72
• DTS Monaco 8.14 & 8.16 (supports Benz till 2018-2019)