Magic FLS0.1M - Full Flex SW Authorization Master Package ECU (cars, vans, bikes) OBD + Bench Master

All the OBD and Bench protocols for ECU have been grouped in this SW package.

Note: we can only activate this activation for Flex devices that were sold by ALmuhandes.

FLS0.1M – Software Flex ECU OBD + Bench (car, bike, van)

All OBD and Bench protocols for ECUs are rounded up in this module. This module can use FLX2.10 or FLX2.11 cables (general purpose OBD and ENET cable).

An increased programming speed compared to X17. Stability of protocol is even more high, which allows for safer writings even on less expensive working environments. In case of Master & Slave ECUs, Flex will automatically recognize the Slave ECU and write the same file loaded on Master ECU on both – now there will be no reason to worry about remembering to write both ECUs manually!

If you have a MAGP1.2M/S, a MAGP1.12M/S (X17) this protocol is totally free of charge. Contact the Sales Department via chat at www.magicmotorsport.com or send an email to info@magicmotorsport.com to purchase the OBD/Bench protocols for ECUs (car, bikes, vans) package (FLS0.1M/S).

- MASTER
The Master version tool has no limitations in the file format. The Master always works with unencrypted files and in .bin format which can therefore be modified with any type of software. Furthermore, the Master has the possibility to use the file editing services offered by MAGICMOTORSPORT and have access to 30 free Green coins per month.

- SLAVE
The Slave version tool works only on encrypted files. For the Slave user it will not be possible to have access to the contents of the files and therefore modify them, as they will be in an encrypted format. In order to make any type of change, the Slave user must contact his reference Master, who will be the only one who can encrypt and decrypt the files. The Slave user must necessarily have a reference Master. The Master can be freely chosen by the Slave user or can be recommended by MAGICMOTORSPORT depending on the geographical area of reference of the Slave user. Once the reference Master has been identified, the Slave user will be linked exclusively to that Master for any operation that requires file modification.

fls0.1-sw-flex-ecu-obd-bench