MD Flasher License 64 - GM ACDelco GEN1/2 OBDII

This module allows working via OBDII connector via CAN-bus with the control units ACDelco Gen1 (1st generation ECU-2 Byte SeedKey) and ACDelco Gen2 (2nd generation ECU - 5 Byte SeedKey), equipped on GM vehicles: Cadillac, Chevrolet, GMC, Hummer, Opel.

Module supports :

• ECU Identification
• Error Reading/Clearing
• Reading of the Processor FullFlash / Writing calibration area

The read / write procedure takes from 2 to 10 minutes, depending on the type of ECU and the adapter used. This module does not calculate checksums.

ECU type with MC :

• GM ACDelco E38 Motorola MPC561
• GM ACDelco E39 Motorola MPC5566
• GM ACDelco E39A Motorola MPC5566
• GM ACDelco E78 Motorola MPC5566
• GM ACDelco E80 Motorola MPC5676
• GM ACDelco E83 Motorola MPC5565

Adapters to work with :

• DrewTech Mongoose
• DrewTech CarDAQ
• Skanmatik 2/2 PRO
• SMS-DiaLink
• Chipsoft J2534 Lite (with OpenPort2 support disabled)
• Chipsoft J2534 Mid (with OpenPort2 support disabled)
• Chipsoft J2534 Pro (with OpenPort2 support disabled)
• Openport 2.0 is not supported

Attention! The operation of this module is completely safe, in case of loss of communication during recording, for example, if the battery on a laptop or the battery on a car runs out,
it is enough to repeat the recording procedure and the operation will be restored.

discover all MD Flasher software from here