HP TUNERS PROLINK+ for MPVI2+ and MPVI3

Specs:

Manufacturer: HP Tuners

Get access to even more vehicle data using PROLINK+ to wire in up to 2x analog signals and 1x CAN bus signal. Compatible with MPVI2+ and MPVI3 interfaces.

Reminder: You must purchase Pro Feature Set to be able to use a PROLINK+ cable.

PROLINK+ for MPVI2+ and MPVI3

Designed specifically for MPVI2+ and MPVI3, the PROLINK+ cable allows professional users to input 2x analog signals (from a wideband sensor, map sensor, boost pressure sensor etc.) and 1x CAN bus signal simultaneously.

Reminder: If you have an MPVI2+ interface, you must purchase Pro Feature Set to be able to use a PROLINK+ cable.

PROLINK+ Specifications:

• 2x dedicated 0-5V analog inputs.
• 1x CAN bus input (500kbps).
• 100Hz sampling rate.
• M8 connector to 5 wire harness.
• For MPVI2+ and MPVI3 interfaces.
• MPVI2+ interfaces must purchase Pro Feature Set to be able to use the PROLINK+ cable.

PROLINK+ for MPVI3 Devices

Since the latest generation MPVI3 interface is standard with Pro Feature Set, you only need to purchase the PROLINK+ cable to wire in these additional inputs. No other purchase is required.

PROLINK+ for MPVI2+ Devices

To utilize the PROLINK+ cable with an MPVI2+ interface, the purchase of Pro Feature Set is required. PROLINK+ will be provided FREE of charge with the purchase of Pro Feature Set for MPVI2+ interfaces. However, if you would like additional PROLINK+ cables for multiple vehicles

Pro Feature Set

Pro Feature Set enables the use of PROLINK+ for both MPVI2+ and the latest generation MPVI3. However, remember that MPVI3 is now standard with Pro Feature

Pro Feature Set also unlocks standalone data logging, allowing you to log directly to your interface’s internal storage without being tethered to a laptop. This highly convenient feature makes it easier than ever to collect data while on the road, track, or dyno.