Why Use DELTA P6?

If your vehicle is misfiring, consuming more fuel than usual, or has weak acceleration, the fuel injectors may be the problem.

The DELTA P6 machine is designed to diagnose and clean all types of modern fuel injectors including GDI, Piezo, FSI, and TFSI with high accuracy and deep ultrasonic cleaning.

🔧 Key Features

DELTA P6 (GDI / Piezo / FSI) Injector Cleaner

• Compatible with GDI, Piezo, FSI, TFSI, MPI fuel injectors
• Supports Japanese, Korean, and European cars: BMW, Mercedes-Benz, VW, Audi, Toyota, Nissan, Hyundai, Kia, Lexus, Mazda, Honda, Mitsubishi, and more
• Ultrasonic Cleaning: Deep internal cleaning using 100W real ultrasonic power
• Spray & Leakage Test: Visual spray pattern and leak test to detect faulty injectors
• Volume Test: Measures the exact amount of fuel injected for each injector
• Resistance Test: Accurate coil resistance reading (±0.1 Ohm precision)
• Working Mode Simulation: Simulates engine RPM from 100 to 9900 to observe injector performance under load
• On-Vehicle Cleaning: Clean injectors while installed on the engine – save time
• Tool Drawer: Comes with multiple adapters and connectors for different injector types
• Side Feed Support: Optional side-feed injector adapter available

🧽 Cleaning Process with DELTA P6

1. Remove injectors from the engine for external cleaning
2. Mount injectors onto the unit and connect fuel and power lines
3. Run pre-clean spray test to inspect spray pattern
4. Transfer injectors to the ultrasonic cleaning tank using special fluid
5. Re-test after cleaning to observe improvements
6. Final leakage and resistance check to confirm performance

📊 Technical Specifications

🚀 Final Outcome

With the DELTA P6 Injector Testing & Cleaning Machine, you can:

• Diagnose injector issues in seconds
• Clean injectors thoroughly and safely
• Boost engine performance and fuel efficiency
• Deliver professional service that matches dealership quality

DELTA P6 (GDI / Piezo / FSI) Injector Cleaner