GODIAG GT100+ Breakout Box ECU Tool with BMW CAS4 CAS4+ and FEM BDC Test Platform Support All Key Lost

Top 3 reasons to get GODIAG GT100 with Full BMW Test Platform:

1.Best Choice for Engineers or Automotive Workshop:
with GODIAG GT100+, can support communication detection and ECU maintenance/ diagnosis/ programming/ coding, will make your work more simple and easier, save your time and money.
with GODIAG BMW CAS4 CAS4+ Test Platform, can support All Key Lost, Add New Key, Synchronize Test and Troubleshooting.
with GODIAG FEM BDC Test Platform, can support to program new key when all keys lost, can add new key to BMW FEM BDC vehicle on bench.

2. Can work with most device to do test, will make your operation much easier , such as Xhorse vvdi2, Autel IM608, Launch Scanner, Vident Scanner, and so on.
3. Fast Shipping and Best Quality device in the Market.
 
HighLights for GODIAG GT100+:

1. It is the latest testing platform for OBDII protocol communication detection and ECU maintenance/diagnosis /programming /coding.
2. It can convert the car OBD2 interface into 16 pin for signal detection and electrical level conversion.
3. Able to connect the single modules or multiple modules of the vehicle.
4. It can be connected with any diagnostic tool to tell whether the car communication is good or not.
5. Can work with the most devices to do tests, will make your operation much easier, such as xhorse vvdi2, Autel Scanner, Launch Scanner, Vident Scanner, and so on.
6. It can also supply power to the car when you change the battery to avoid the vehicle control module data being lost,automatically locked,the key remote control fails and the fault light turns on.
7. Ship from US/UK/CZ warehouse Fast and NO TAX
8. Guarantee: One year warranty.
9. Can Works Together with BMW CAS4 & CAS4+ Test Platform，they can work with GT100/Xhorse VVDI2/Lonsdor K518/CGDI/Autel im608 Support Off-site Key Programming/All Keys Lost/ Add New Key
10. Can work Together with BMW FEM BDC Test Platform, to program FEM BDM Keys.

Highlights to get GODIAG FEM BDC Test Platform:

When making keys, BMW F series FEM & BDC all need to preprocess the IMMO box. If there is no test platform, it needs to disassemble and install the control unit in the car back and forth.
Using our test platform can be completed on the bench, It's both economical and convenient.

Godiag FEM / BDC programming test platform 5 major features:

1. Provide locksmiths with the easy and convenient connection for FEM/BDC immobilizer system.
2. Perform the synchronization test for the programmed FEM/BDC and the key
3. Provide a test environment for the engineers who professionally recycle FEM/BDC.
4. Help automobile maintenance engineers check whether the FEM/BDC and the key are synchronized correctly.
5. Provide professional engineers with connecting FEM BDC modules and instrument.

Package includes:

1pc x Host
1pc xOBD 2-in-1 extension cable
1pc xColored jumper cable
1pc xPower supply 12V
1pc xResistance 120 ohm
6pcs xBanana plug
24pcs xWire accessories, Dupont 2.54mm connector female pin
1pc x BMW CAS4 & CAS4+ Programming Test Platform
1pc x BMW FEM BDC Programming Test Platform
2pc x GODIAG OBD2 to OBD25