Autel G-BOX2 Key Programming Adapter for Mercedes and BMW Vehicles

Autel G-BOX2 Key Programmer Adapter Brief:

The Autel G-BOX2 is an adapter compatible with Autel's IM508 (with purchase of XP400 programmer) and IM608 Key Programming tablets wont to aid within the programming keys for Mercedes DAS3 CAN EIS/EXS is an ALL Keys Lost situation.
The G-Box2 also supports DME/DDE ISN Reading and Writing in Boot Mode on applicable BMW vehicles.
Bench Method is additionally supported. All Keys Lost password calculations are 4x to 8x faster.
Moreover, the amount of insertions and removals of W216 and W164 EISs after the year 2009 is reduced to zero, greatly simplifying the operation steps.
It are often utilized in Boot Mode or Bench Method. G-BOX2 must be used with the Autel IM508 or IM608 for reliable performance.

• Autel G-BOX2 Key Programming Adapter
• MaxiIM Key Programming Tablet Accessory used with the XP400
• Mercedes-Benz All Keys Lost, Faster Password Calculation
• Mercedes-Benz All Keys Lost, No More Repeated Insertions and Removals of IR Simulator
• Mercedes-Benz All Keys Lost, Can Be Programmed on the Vehicle Without Removing the EIS
• BMW DME/DDE ISN Reading and Writing in Boot Mode or Bench Method
• Contains All Connections Including Cables, Fuse Connector, and CAN Line Connectors

Autel G-BOX 2 Key Programmer Adapter Highlights:

• Autel G-Box2 Adapter can work on Mercedes-Benz vehicles with DAS3 CAN EIS/EZS in AKL.
• Compare with other adapter Autel G-Box2 Adapter is more effctive to reading the ECU data from W204 and W207 EISs.
• AUTEL G-BOX2 Adapter can support Mercedes All Key Lost BMW DME Reading.
• AUTEL G-BOX2 Adapter use with both the Autel MaxiIM IM608, IM508 and Auro IM600.
• Autel G-Box2 Adapter is specially designed for Mercedez-Benz vehicles with DAS3 CAN EIS/EZS in AKL.
• It helps to reduce the time for reading the ECU data from W204 and W207 EISs by over 85%.

Autel G BOX 2 Key Programmer Adapter Features:

• Supports Mercedes Benz All Keys Lost, faster calculate password
• Supports IM608 or IM508 with XP400
• Used for Faster Mercedes ECU data and EIS password calculation
• Mercedes DAS3 can EIS/EZS all keys lost
• Reduces reading time of W204 ECU data & W207 EIS by over 85%
• No need to remove and reinsert the key for W221 & W164 after 2009 models
• Can read and write BMW DME/DDE ISN in boot mode
• Compatible with Auro IM600 & Auro IM100 with XP400

When all the keys of the Mercedes-Benz vehicle are lost, you can operate through the OBD.

Notice:

This method is suitable for Mercedes-Benz W204, W207, W216 and W164 EISs after the year 2009.

G-Box1 vs. G-Box2

1. Mercedes DAS3 add keys and all keys lost on bench. (both)
2. Mercedes DAS3 all keys lost on vehicle. (both)
3. Read engine control module password by boot. (both)
4. Read Bosch ME/MED/MEVD/EDC 17 Engine control module password on the bench. (G-BOX2 only)

Autel G BOX 2 Key Programmer Adapter Connection Method:

1. Connect the G-Box2 to vehicle' s OBDII
2. Remove the fuse of vehicle EIS, Connect the Relay ports to the fuse using the supplied fuse cable
3. When the vehicle has an ELV, connect the K7 port and ELV plug using the supplied K-line cable
4. Connect the G-Box2 to the Autel Diagnostic Tablet (MaxiIM IM608, IM508)