4.5 TON 4 Post Lift for Wheel Alignment M445H

1.1 Product Features

• Pneumatic unlocking for safety and reliability.
• Wire rope fracture protection to avoid risks.
• Ultra-long body with an effective platform length of 4510mm.
• High-strength materials for superior performance:
  • 1.5 times static performance.
  • 1.15 times dynamic performance as per CE standards.
• Standard secondary lifting trolley included.

1.2 Technical Parameters

• Drive Mode: Direct-acting hydraulic cylinder
• Rated Lifting Capacity: 4500KG
• Hydraulic Station: 2.2KW aluminum alloy
• Unlock Method: Pneumatic unlocking
• Min Lifting Height: 210mm
• Max Lifting Height: 1700mm
• Platform Length: 4510mm
• Inner Width of Post: 2830mm
• Overall Width: 3185mm
• Motor Parameters:
  • 1PH, 220VAC, 2.2KW, aluminum alloy housing
  • 3PH, 380VAC, 2.2KW, aluminum alloy housing

1.3 Main Structure Principles

• Lifting Mechanism: Hydraulic cylinder drives beams upward via wire rope.
• Supporting Mechanism: Platform formed by left and right bridge plates.
• Balance Mechanism: Four wire ropes ensure synchronized lifting/lowering.
• Manual Safety Mechanism: Safety block locks/unlocks the sliding table pneumatically.
• Wire Rope Fracture Protection: Safety claws secure beams if a rope breaks.
• Safety Mechanism Range: 210mm to 1700mm lifting height.
• Levelness Preset: Adjust screws to keep bridges horizontal.

Chapter 2: Installation and Adjustment Tools

Required Tools

• Level gauge (Carpenter type)
• Chalk line (min 4.5m)
• Hammer (1.5kg)
• Adjustable wrench (40mm)
• Open-end wrench set (11mm-23mm)
• Flathead screwdriver (150mm)
• Impact drill (18mm)
• Carbide drill (￠18mm)

Chapter 3: Installation

3.1 Installation Precautions

• Improper installation may cause damage or injury; follow the manual strictly.
• Install on level concrete ground; avoid asphalt or cracked surfaces.
• For basement floors, obtain approval from an architectural engineer.
• Ensure no overhead obstacles in the mounting area.
• Perform ground drilling tests to verify concrete thickness.
• Prepare proper power connections through a certified electrician.

3.2 Installation Procedures

• Install on a concrete slab with:
  • Minimum thickness: 500mm
  • Minimum curing time: 7 days
  • Reinforcement bars for strength
• Inspect the mounting area and ensure it meets the required specifications.
• Follow step-by-step instructions provided in the user manual for assembly.

Proper installation and adherence to the guidelines will ensure optimal performance and longevity of the lift.