Mega GDI Fuel Injector 6-cylinder Cleaner and Tester is a great upgrade, which adapts the latest GDI design. It not only can be used to clean and test the standard injectors, of note that it can carry out GDI injectors, including compatible for Benz, BMW, AUDI, Porsche. It comes with multi voltages available for GDI injectors, which enables to adapt for different types of injector testing. The machine is the necessary and preferred equipment for the automotive serving and maintenance, research, and teaching training departments.
Support For 99% Cars & Motorcycles
Support for Audi, Australia d, Benz, BMW, Brilliance, Chevrolet, Chevy, Chrysler, Citroen, Dacia, Dadi, Daewo, Daihatsu, Demo, Fiat, d, GM, Holden, Honda, Hyundai, Isuzu, Jaguar, Kia, Lancia, Land Rover, Mahindra, Maruti, Mazda, Mitsubish, Nissan, Opel, Peugeot, Porsche, Renault, Romeo, Rover, Saab, Seat, Skoda, Smart, Subaru, Suzuki, Tata, Toyota, Volvo, VW, Yamaha.
About CT series products：
Effectively cleans fuel injectors.
Helps restore power and fuel economy.
Helps improve idle and throttle response.
Helps eliminate stalling due to dirty fuel injectors.
Helps differentiate fuel injector working status.
Helps reduce the cost of injector replacement, especially for the expensive GDI injectors (CT400 only).
Mega Fuel Injector Cleaner & Tester Machine Comparison Table:
Mega GDI Fuel Injector Cleaner & Tester Machine Feature
[For GDI Injector Cleaning&Test]: Mega GDI can clean and test not only standard injectors but also GDI injectors, such as for Mercedes-Benz, BMW, Audi, Porsche, Ford, and other direct injection engines.
[Multi Voltage Selection]: Mega GDI Fuel Injector 6-cylinder Cleaner and Tester designs with various types of voltage output (12V, 70V & 120V) to be selected to adapt for different types of injector testing.
[Upgrade Ultrasonic Cleaning]: Different from other cleaner& tester machines, AUTOO CT400 comes with a cooling fan and thermal protection, and with a power of 60w, its ultrasonic cleaning capacity is significantly enhanced.
[Various Parts equipped&Portable Drawer]: It is equipped with a variety of injector accessories for different needs. A portable drawer at the bottom is designed to store a variety of parts and for easy access.
[6-Cylinder & 2 Draining Ports Design]: Mega GDI can test and clean 6 injectors at the same time for better efficiency; it also has both control valves for cleaning solution draining and test liquid recovery. Very easy and convenient to deal with and no worries about leaving a mess.
Mega GDI Fuel Injector Cleaner & Tester Machine Parameter
● Power supply: AC 220V/110V±10%
● Frequency: 50-60HZ±0.5
● Relative humidity: <85%
● Ambient temperature: 0℃～＋40℃
● External magnetic field strength: <400A/m
● No open flames are allowed around
● Fuel tank capacity: 1500 ml
● Test tube amount: 140 ml
● RPM range: 0～7500 r/min
● Time range: 0～9900 times
● PWM pulse width: 0～20.0 ms
● System pressure: 0～0.55Mpa (adjustable)
● Timing: 0～20 minutes adjustable
● Ultrasonic cleaning power: 60W (intermittent work)
● Ultrasonic cleaning frequency: 28 KHZ±0.5 KHZ
● Dimensions: 390mm (length) × 410mm (width) × 430 mm (height)
● Weight: 16.6KG
Q & A:
WILL THERE BE TARIFFS?
The tariff policy varies from country to country, and some countries do not have tariffs while others do. We can help you fill in a lower declaration value, resulting in fewer customs duties, if you want.
HOW TO CHOOSE THE CORRECT VOLTAGE WHEN TESTING INJECTORS?
If you don’t know what the voltage of the injector is when you are testing the injector. You can start testing at 12V and if it doesn’t run, switch to 70V. If it doesn’t run at 70V either, switch to 120V.
WILL THE WRONG VOLTAGE CAUSE DAMAGE TO THE INJECTORS?
Even if you choose the wrong voltage, it will not damage the injector nozzle in a short time. Just change to the right voltage in time.
- 1pcs* Mega GDI Main Unit
- 6pcs* Taper Adapter φ10.5-13.6φ
- 6pcs* BMW Special Adapters
- 1pcs* Special Nozzle Pad
- 5pcs* Plugs For Oil Rail
- 1pcs* Ultrasonic Bath Cover
- 6pcs* 16mm Adapters
- 6pcs* Nozzle Pads
- 1pcs* Oil Rail
- 6pcs* Adapter Cables
- 1pcs* Power Cable
- 4pcs* Fixed Screws For Oil Rail
- 4pcs* Fixed Nuts For Oil Rail
- 1pcs* Ultrasonic Cleaning Bracket
- 1pcs* Filling Funnel
- 1pcs* Outlet Valve
- 6pcs* 11mm Adapters
- 6pcs* 12mm Adapters
- 6pcs* 12.5mm Adapters
- 6pcs* 13mm Adapters
- 6pcs* 14mm Adapters
- 6pcs* 15mm Adapters
- 1pcs* User Manual
No customer reviews for the moment.