QNix® 4200 Car Paint Inspection Device with Integrated Probe Fe 5 mm

Introduction

Al Muhandes Workshop Equipment is proud to be the exclusive agent in the Middle East for QNIX, a leading German company in precision hardware manufacturing. We present the QNix® 4200 Car Paint Inspection Device with Integrated Probe Fe 5 mm, designed for a variety of applications, especially in the automotive industry.

Handling Instructions

Despite its rugged design, the QNix® 4200 should be handled correctly to ensure accurate measurements at all times. Avoid dropping it and protect it from dirt, dust, humidity, chemicals, and aggressive vapors. Store the gauge in its protective case after use. Avoid large temperature variations, direct sunlight, and strong electromagnetic fields, such as transformers or high voltage lines. Do not measure on magnetized parts. Clean the housing with a soft damp cloth and check the probe tip regularly for dirt and paint.

Features

• Integrated Fe/NFe Probe: Equipped with a wear-resistant ruby tip for long-term use.
• Large Measuring Range: Up to 3000 µm for measuring non-magnetic coatings on steel and iron, as well as all insulating coatings on non-ferrous metals such as aluminum (QNix® 4500).
• Readable Graphic LCD Display: Provides precise presentation of readings, battery condition, unit, mode, and serial number.
• Flat Design: Allows for measurements in hard-to-reach places.
• Simple Flexible Use: Easy to use even on wide surfaces, with high reliability and precision even in tough operating conditions.
• No Calibration or Probe Change Needed: Works automatically with an automatic ON/OFF system.
• Convenient One-Hand Operation: For ease of use, with storage of the last reading.
• V-Groove for Safe Measurements: Helps measure round surfaces like axles and rods.
• 2 x 1.5V Batteries (Type AA Alkaline): Supports thousands of measurements.

Technical Data

• Measuring Principle: Two magnetic measuring principles: Magnetic-Flux/Hall Effect for Fe and Eddy Current for NFe (QNix® 4500).
• Measuring Ranges: Fe: 0.0 - 3000 µm, NFe: 0.0 - 3000 µm (120 mils).
• Metric System µm/mil: Yes.
• Measuring Interval: Single measurement: 850 ms.
• Display Metric: From 0.0 - 999 µm, from 1000 µm in mm.
• Resolution: 1 µm in the range up to 999 µm, 0.01 mm in the range from 1 mm.
• Minimum Measuring Area: Ø 25 mm.
• Minimum Curvature: Convex: 5 mm; Concave: 25 mm.
• Minimum Substrate Thickness: Fe: 0.2 mm, NFe: 0.05 mm (QNix® 4500).
• Temperature Range: 0 - 50°C (32 - 122°F).
• Permitted Storage Temperature: -10 - 60°C (14 - 140°F).
• Power Supply: 2 x 1.5V Batteries (Type AA Alkaline).
• Dimensions (L x W x H mm): 100 x 60 x 27 mm (gauge with integrated probe).
• Weight Including Battery: Gauge with integrated probe: 105 g, Gauge with Cable Probe: 147 g.

Standards

The device complies with standards: DIN EN ISO 2808, ISO 2178, ASTM B 499, ASTM D 7091, ISO 2360.

Uses for Car Garages

The QNix® 4200 Car Paint Inspection Device with Integrated Probe Fe 5 mm is essential for car garages and automotive service centers. It can be used to accurately measure paint thickness, helping with:

• Quality Control: Ensuring the quality and uniformity of paint thickness across all parts of the vehicle.
• Detection of Previous Repairs: Identifying any prior paint repairs that might not be visible to the naked eye, helping to provide accurate reports to customers.
• Assessment of Used Cars: Providing precise information about the paint condition, enabling garages to offer reliable evaluations for customers interested in buying used cars.
• Avoiding Unexpected Costs: Early detection of any paint defects or issues can prevent expensive repair costs in the future.

Why Choose QNix® 4200?

With advanced German technology and superior quality in precision hardware manufacturing, the QNix® 4200 with Integrated Probe Fe 5 mm ensures accurate and reliable results in coating thickness measurement on iron and aluminum. Choosing the QNix® 4200 from Al Muhandes Workshop Equipment guarantees the best performance and reliability for various industrial and engineering applications.

Delivery Content

• Handheld gauge with integrated or cable probe.
• Fe reference plate or Fe/NFe reference plate (QNix® 4500).
• 2 x 1.5V Mignon batteries (type AA alkaline).
• Test certificate.
• Operating instructions.
• Robust plastic case for transport and storage.