QNix ® 4500 Car Paint Inspection Device with Integrated Dual Probe Fe 3 mm/NFe 3 mm

Introduction

Al Muhandes Workshop Equipment is proud to be the exclusive agent in the Middle East for QNIX, a leading German company in precision hardware manufacturing. We present the QNix ® 4500 with Integrated Dual Probe Fe 3 mm/NFe 3 mm, designed for a variety of applications, especially in the automotive and painting industries.

Handling Instructions

Despite its rugged design, the QNix® 4500 should be handled correctly to ensure accurate measurements at all times. Avoid dropping it and protect it from dirt, dust, humidity, chemicals, and aggressive vapors. Store the gauge in its protective case after use. Avoid large temperature variations, direct sunlight, and strong electromagnetic fields, such as transformers or high-voltage lines. Do not measure on magnetized parts. Clean the housing with a soft damp cloth and check the probe tip regularly for dirt and paint.

Features

• Integrated Dual Probe Fe/NFe: Equipped with a wear-resistant ruby tip for long-term use.
• Large Measuring Range: Up to 3000 µm for Fe and 2000 µm for NFe, allowing precise measurements on steel, iron, and non-ferrous metals such as aluminum, zinc, and copper.
• Readable Graphic LCD Display: Provides precise presentation of readings, battery condition, unit, mode, and serial number.
• Flat Design: Allows for measurements in hard-to-reach places.
• Simple Operation: Easy to use with one-hand operation and no calibration needed.
• Innovative Technology: Proven Hall sensor and Eddy Current technology with an integrated probe without cables or plugs.
• Broad Spectrum of Use: Suitable for nondestructive measurements on steel, iron, and non-ferrous metals.
• Protective Measuring: Polished ruby tip protects both probe and surface to be measured.
• Automatic On/Off Switching: Enhances convenience and battery life.

Technical Data

• Measuring Principle: Two magnetic measuring principles: Magnetic-Flux/Hall Effect for Fe and Eddy Current for NFe.
• Measuring Ranges: Fe: 0.0 - 3000 µm, NFe: 0.0 - 2000 µm.
• Metric System µm/mil: Yes.
• Measuring Interval: Single measurement: 850 ms.
• Display Metric: From 0 to 999 µm, from 1000 µm in mm.
• Resolution: 0.1 µm in the range up to 999 µm, 0.01 mm in the range from 1 mm.
• Accuracy: ±(3%+2µm) for Fe < 2mm and NFe < 2mm, ±(5%+2µm) for Fe > 2mm and NFe > 2mm.
• Minimum Measuring Area: Ø 25 mm.
• Minimum Curvature: Convex: 5 mm; Concave: 25 mm.
• Minimum Substrate Thickness: Fe: 0.2 mm, NFe: 0.05 mm.
• Display: Digital LCD.
• Temperature Range: 0 - 50°C (32 - 122°F).
• Permitted Storage Temperature: -10 - 60°C (14 - 140°F).
• Power Supply: 2 x 1.5V Batteries (Type AA Alkaline).
• Dimensions (L x W x H mm): 100 x 60 x 27 mm (with integrated probe).
• Weight Including Battery: With integrated probe: 105 g, With Cable Probe: 147 g.

Standards

The device complies with standards: DIN EN ISO 2808, ISO 2178, ASTM B 499, ASTM D 7091, ISO 2360.

Uses for Car Garages and Painting Applications

The QNix® 4500 with Integrated Dual Probe Fe 3 mm/NFe 3 mm is essential for car garages and industrial painting applications. It can be used to accurately measure paint thickness, helping with:

• Quality Control: Ensuring the quality and uniformity of paint thickness across all parts of the vehicle or painted surface.
• Detection of Previous Repairs: Identifying any prior paint repairs that might not be visible to the naked eye, helping to provide accurate reports to customers.
• Assessment of Used Cars and Painted Surfaces: Providing precise information about the paint condition, enabling garages and paint shops to offer reliable evaluations for customers.
• Avoiding Unexpected Costs: Early detection of any paint defects or issues can prevent expensive repair costs in the future.

Why Choose QNix® 4500?

With advanced German technology and superior quality in precision hardware manufacturing, the QNix® 4500 with Integrated Dual Probe Fe 3 mm/NFe 3 mm ensures accurate and reliable results in coating thickness measurement on iron and non-ferrous metals. Choosing the QNix® 4500 from Al Muhandes Workshop Equipment guarantees the best performance and reliability for various industrial and engineering applications.

Delivery Content

• Handheld gauge with integrated or cable probe.
• Fe reference plate or Fe/NFe reference plate.
• 2 x 1.5V Mignon batteries (type AA alkaline).
• Test certificate.
• Operating instructions.
• Robust plastic case for transport and storage.